The electromagnetic flow meter accurately measures the flow rate of any conducting liquid or slurry that is flowing in closed pipes. It is obstruction less and hence offers no pressure drop in the process. Absence of moving parts ensures that there is no need for maintenance. The performance of the
A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. Turbine Flow Meters are useful for
An ultrasonic flow meter is a type of flow meter that measures the velocity of a fluid with ultrasound to calculate volume flow. Using ultrasonic transducers, the flow meter can measure the average velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured
A vortex flow meter is a flow measurement device best suited for flow measurements where the introduction of moving parts presents problems. It operate under the vortex shedding principle, where an oscillating vortexes occur when a fluid such as water flow past a bluff (as opposed to streamlined)
For measurement of high flows of cold water. Dry-dial. Low pressure loss. Measuring accuracy conform to ISO 4064 Standard, accuracy class 2. The meter can be installed in horizontal, vertical or inclined position (a horizontal position with the register face upwards is recommended). Working
Water meters are categorised in to two; Domestic and Bulk. Line size from 15mm(1/2”) to 50mm (2”) are domestic meters and large size meters are Bulk Meters. Water meters are classified as Class A, B. Class B meters are expected to have the capability of measuring at a very low flow
Rotameters are simple industrial flow meters that measure the flow rate of liquid or gas in a closed tube. The flow rate inside the rotameter is measured using a float that is lifted by the fluid flow based on the buoyancy and velocity of the fluid opposing gravity pulling the float down.
METAL TUBE ROTAMETERS is an instrument used to measure instant flow rate of Liquids and Gases. Can be used for metering of translucent/opaque fluids under high operating pressure and temperature.
As the name indicates, ultrasonic / level sensors measure distance by using ultrasonic waves. The sensor head emits an ultrasonic wave and receives the wave reflected back from the target. ultrasonic / level sensors measure the distance to the target by measuring the time between the emission and
Level sensor is a device that is designed to monitor, maintain, and measure liquid (and sometimes solid) levels. Once the liquid level is detected, the sensor converts the perceived data into an electric signal. Point level sensors are designed to indicate whether a liquid has reached a specific
A level switch is a sensor that detects the presence of liquids, powder, or granulated materials at a specific location. (It is also referred to as level sensor) For example, when a tank is supplied with liquid, it overflow. In order to prevent overflows, a level switch is to be installed different
Temperature Transmitter is a device that connects to a temperature sensor to transmit the signal elsewhere for monitoring and control purposes. Typically, the temperature sensor is either an RTD, Thermisor or Thermocouple type sensor and will interface with a PLC, DCS, data logger or display
The storage of fire extinguishing water plays a key role in the safety of all buildings and systems. The water supply is usually not sufficient in the event of a fire. In these cases, the authorities often stipulate that a sufficient amount of fire-fighting water must be available. Here is where
Our principal, Rostfrei has most integrated SMC manufacturing facilities in India and is one of the very few concerns having such facilities under one roof, worldwide. Rostfrei is continuously developing new products for Indian as well as for the world market. FRP Storage tanks combined with the
Glass Fused Steel tanks (GFS) also called as Glass Lined Steel tanks(GLS) are made by fusing stainless steel and glass. The reason for fusing glass with steel is to enhance the properties of the latter. Single Steel is vulnerable to environmental conditions, hence fusion is required. After fusing
Tank liners prevent the material stored in the tank to keep contact with the tank surface thereby ensuring the stored material to remain contamination free. It does so in the following ways:
Improves Impermeability : Most of the storage tanks are filled with some sort of liquid, water in
Bolted Storage Tanks come in various sizes and are suitable for numerous applications like Fire Water Tank, Raw Water Tank, Industrial Liquid Storage Tanks, Bio-Digester Tank, Zincalume Tank, Glass Fused To Steel Tank and RO Tank. Rostfrei Steels is one the leading bolted tank manufacturers and
A flow switch is a mechanical instrument that is used to control the flow of air, steam or liquid. Flow switches work by sending trip signals to another device (a pump for example) within the system, telling it to shut off or to turn on, which will further protect it from damage and for cooling