Innovative Technologies

Turbine Flow Meter

Turbine Flow Meter

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. Turbine Flow Meters are useful for liquids & gases in general industrial application. Suitable for hygienic application.



The pickup coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. Flow rate Indicator / Totalizer / Transmitter and Controllers are available in Local/Remote and Panel Mounted Options.

Yes! I am interested

Submit Your Requirement


Fluid Clear Liquids & Gases
Viscosity Up to 20 cp
Design Pressure Up to 25 Kg/cm2
Line Size 15 NB to 200 NB
Available Materials SS304
Flow Units M3/H,M3/M,M3/SL/H, L/M,L/S,USG/H,USG/ M,USG/S
Design Temperature Up to 110C
Power Supply  220 VAC/24VD
Output   4- 20 mA+HART
Relay Output  Batcher
Connection Flanged to ASA/BS/DIN/ Triclover Standard Screwed to BSP/NPT(M/F)
Accuracy +-1% of FSD & +- 0.5% on request
Flow rate Display 8 Digit LCD
Totalizer Display 10 Digit LCD
Protection IP66 / Ex-Proof; Optional: IP 68
Communication port RS485(Modbus) (Option)
Lowest velocity 0.1 m/s

  • Explore More Products

Looking for "Turbine Flow Meter" ?